Independent claim appraisal in all 58 California countiesinfo@californiainsuranceappraiser.com+1 (844) 537-1427
CaliforniaInsurance Appraiser (844) 537-1427

Free calculator

Roof Area and Pitch Calculator for Tile and Shingle Roofs

Check the square count on the carrier’s estimate. Enter the footprint and pitch, pick your roofing, and see squares, waste and a rough material count.

Roof area & pitch calculator

Check the squares on your estimate
Measurement method
Roof squares (before waste)0
Pitch multiplier1.000
Roof surface area0
Squares with waste0
Approx. field tiles0
Rough replacement cost—

For planning only. Results depend on what you enter and on your policy, and aren’t a quote, an appraisal or legal advice. Nothing you type leaves your browser.

How roof squares work

A roofing square is 100 square feet of roof surface. Because roofs slope, the surface is larger than the footprint. The pitch multiplier converts one into the other: a 5/12 roof has about 8% more surface than its footprint, a 12/12 roof about 41% more.

Tile versus shingle

Standard concrete tile runs roughly 85 to 95 field pieces per square, depending on profile; composition shingles usually come three bundles to a square. Tile roofs also need underlayment, battens, hip and ridge pieces and bird stops that are priced separately. The material counts here are approximate.

What to compare

If the estimate’s squares are well below the calculator’s figure, check whether a slope, a porch roof or a garage was left out, and whether waste was applied. Then read about roof damage appraisal.

Questions about this tool

Is this as accurate as a measurement report?

No. It is a quick check. Aerial reports and field measurements are more precise, especially on complex roofs.

Why does waste differ by roof shape?

Hips, valleys and cut-up sections require more cutting, so more material is wasted.

More free tools

Want a professional to check the numbers?

Send us your estimate and we’ll review it line by line.